industrysourcing
Hot Wire Anemometer
Le 21/12/2017
GM8903 Hot Wire Anemometer Features
• Measurement of wind velocity, temperature and flow
• Unit conversion of wind velocity, temperature and flow
• Measurement of maximum and minimum wind velocity
• Measurement of 2/3 Vmax and average wind flow
• Data holding, storing and deleting function
• Low battery indicating function
• Auto power off function (power off automatically if no further operation for 10 minutes )
• Memory of 350 records
• Backlight
• Connecting to PC with USB cable
• Audio key pressing alert
• Large LCD display
GM8903 Hot Wire Anemometer Specification
1. Wind Velocity Range:
Unit | Wind Velocity | Resolution |
Lowest Point
of start value
|
Accouracy |
m/s | 0.0-30.0 | 0.001 | 0.3 | ±3%±0.1 |
Ft/min | 0.0-5860 | 0.01/0.1/1 | 60 | ±3%±20 |
Knots | 0.0-55.0 | 0.01/0.01 | 0.6 | ±3%±0.2 |
Km/h | 0.0-90.0 | 0.001 | 1.0 | ±3%±0.4 |
Mph | 0.0-65 | 0.001/0.01 | 0.7 | ±3%±0.2 |
2. Wind flow range:
CMM: 0-999900 m3/min
CFM: 0-999900 ft3/min
Unit | Range | Resolution | Area |
CFM(FT3/MIN | 0-999900 | 0.001-100 | 0.001-9999 |
CMM(M3/MIN) | 0-999900 | 0.001-100 | 0.001-9999 |
3. Unit Conversatin:
m/s | Ft/min | Knots | Km/h | Mph | |
1m/s | 1 | 196.87 | 1.944 | 3.60 | 2.24 |
1ft/min | 0.00508 | 1 | 0.00987 | 0.01829 | 0.01138 |
1knots | 0.5144 | 101.27 | 1 | 1.8519 | 1.1523 |
1km/h | 0.2778 | 54.69 | 0.54 | 1 | 0.6222 |
1mph | 0.4464 | 87.89 | 0.8679 | 1.6071 | 1 |
4. Air Temperature Range:
Wind Temperature
Unit | Scale | Resolution | Accuracy |
℃ | 0.0-45.0 | 0.1 | ±1.0℃ |
℉ | 32.0-113.0 | 0.1 | ±1.8℉ |
5. Operation Conditions:
Temperature | Humidity | |
Host | 0-50℃ (32℉~122℉) | ≤80% RH |
Sensor | 0-60℃ (32℉~140℉) |
6. Storage Conditions:
Temperature | -40℃~60℃ (-40℉~140℉) |
Humidity | ≤80%RH |
7. Power supply : AAA 1.5V Alkaline battery *4
8. Low battery indicating: 4V±0.2V
9. Stand by current 0uA
10. Operating Current ≤60mA
11. Battery use life: 20H (Continuous Use)
12. Dimensions:
Meter: 77x36x164mm
Probe: 30.5x30.5x305mm
30.5x30.5x1000mm(Elongated)
13. Net Weight: 330g (Not Included Battery)
- Commentaires textes : Écrire
Dew Point Sensor - Extreme Dry Air - VPA.8000.1003
Le 07/09/2017
Dew Point Sensor - Extreme Dry Air - VPA.8000.1003
VPA.8000.1003 Dew Point Sensor Product Description
VPInstruments’ dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system.
Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time.
VPA.8000.1003 Dew Point Sensor Features and benefits
2-wire loop powered connection
Dew point or ppm moisture content
IP66 (NEMA 4X)
Excellent sensor protection
Fast response time
VPA.8000.1003 Dew Point Sensor Application
Extreme dry air
VPA.8000.1003 Dew Point Sensor Specifications
Performance | |
Measurement range | -100 ... +20°C | -148 ... 68 °F dew point |
Accuracy (dew point) | ±2°C | ±3.6 °F dew point |
Response time | 5 mins to T95 (dry to wet) |
Electrical output/input | |
Output signa | 4 ... 20 mA (2-wire) current source, configurable over the entire range |
Supply voltage | 12-28VDC |
Current consumption | 20mA max |
Supply voltage influence | ±0.005% RH/V |
operating conditions | |
Operating humidity | 0 ... 100% RH |
Operating temperature | -40 ... +60°C | -40 ... 140 °F |
Operating pressure | 450 barg max. |
Temperature coefficient | Temperature compensated across operating temperature range |
Mechanical specifications | |
Ingress protection | IP65 | NEMA 4 |
Housing material | Stainless steel |
Dimensions | L=132mm x ø27mm | 5,2 x 1,1" |
Filter | HDPE Guard <10 μm |
Process connection | 5/8" - 18 UNF |
Connection | DIN connector |
- Commentaires textes : Écrire
Carbon Monoxide Alarm (CO Alarm)
Le 20/06/2017
• AC/DC operated carbon monoxide alarm
• Non-radioactive technology for environmental friendly
• CO concentration threshold:
varying time-to-alarm depending on concentration
• With quick fix mounting bracket for easy installation and simple AC connector for easy installation
• Fitting and battery tamper resist feature
• Inter-connectable up to 40 CO, Heat And/Or Smoke Alarms
• 3 color LED indicator (Fault and Alarm and AC power indicator)
• Low-battery and battery missing warning indicator
• Hush/Test button
• Auto-reset when CO clears
• CE approved, comply with EN50291-1:2010
- Commentaires textes : Écrire
FSM-T-01 Pre-calibrated Module for Methane Gas
Le 10/03/2017
FSM-T-01 Pre-calibrated Module for Methane Gas
Gas concentration is digitally and quantitively output by means of communications
Alarm output can be set through programming
Factory calibrated, temperature compensated
Compact size, low cost
- Model Number: FSM-T-01
Product Specification
FSM-T-01 Pre-calibrated Module for Methane Gas
Features:
Gas concentration is digitally and quantitively output by means of communications
Alarm output can be set through programming
Factory calibrated, temperature compensated
Compact size, low cost
Applications
Front-end solution for methane gas alarm
Simple methane gas alarm output
FSM-T-01 is a pre-calibrated module for methane gas alarm which applies TGS2611 sensor together with optimized classic circuit measuring methane gas concentration. The module is pre-calibrated by Figaro's highly accurate calibration equipment and manufactured with mature aging process. The purpose of the module design is to save the development and production cost of the user to its greatest extent, making it easier and more convenient for them to manufacture gas alarm for civil natural gas.
The module is designed with two different interfaces considering the convenience for use. TTL level’s asynchronous communication interface allows the user to read real time gas concentrations with very simple commands;also different alarm thresholds can be set through communication programming. When the gas concentration reaches set value alarm output signal would be generated automatically from the alarm terminal.
Besides , this compact sized module applies a socket type design which facilitates regular replacements of the sensors. For some main board, different modules can also be replaced simply by plugging and pulling out, fulfilling the functions of detection and alarming for methane and other gases.
Specifications:
Name | Methane gas sensor module | |
Module No. | FSM-T-01 | |
Gas sensor | TGS2611-E00 | |
Range | 0~20% LEL | |
Accuracy
|
≤ ±2.5% LEL(4000ppm~5000ppm) | |
≤ ±5% LEL(full scale) | ||
Response time (T90) | ≤ 30s | |
Operating | -10℃~+55℃,25~95%RH | |
Storage | -25℃~+60℃,20~95%RH | |
Input voltage | 5.0±0.2V DC | |
Power consumption(MAX) | ≤ 0.5 W | |
Net Weight | <15g | |
Dimensions | 27.2×22.8×17 mm | |
Standard Test Conditions
|
Environment | 20±2℃,65±5%RH |
Loop | 5.0±0.2V DC | |
Warming-up time | ≥ 5 min |
- Commentaires textes : Écrire